Common faults and solutions for glass washers?

[Medium glass] 1, common fault: the drive roller does not run

Cause: The motor is not running and the chain is too loose

Remedy: Check the cause of the motor and adjust the tightness of the chain

2, common faults: brush beats or loud noise

Cause: loose strips, bearing damage

Remedy: adjust the chain tension, replace the bearing

3, common faults: the drive speed is unstable

Cause: The chain is too loose and the speed control table is unstable.

Remedy: adjust the chain tightness, replace the speed control table

4, common faults: glass deflection in the washing machine

Reason: uneven pressure on both ends of the press roller

Remedy: Adjust the pressure roller

5, common faults: broken glass

Cause: The pressure roller cannot be pressed and the brush bearing is damaged.

Remedy: adjust the pressure roller, replace the brush bearing

6, common faults: bearing seat fixing screws

Cause: The bearing housing fixing screws are loose

Remedy: tighten the bearing block fixing screws

7, common faults: glass has water points

Cause: The flap is damaged and the suction roller is not completely softened.

Remedy: Replace or repair the water baffle, soften the suction roll

8, common faults: electrical appliances do not work

Cause: The circuit is out of phase and the main switch is damaged.

Remedy: check the circuit, replace the switch

9, common faults: glass has water mist

Cause: The heater is damaged and the fan is not working.

Remedy: Replace the heating tube and check the cause

10, common faults: glass cleaning is not clean

Cause: The water pipe is blocked and the brush spacing is large.

Remedy: remove dirt, adjust spacing