Metal soft connection sold by the manufacturer

The corrugated metal hose belongs to the flexible pipeline component and is mainly composed of a metal corrugated pipe body, a stainless steel mesh sleeve and a joint member. Connected in the middle of the pipeline or equipment to compensate for relative displacement. When there are pumps and compressors in the working environment, vibration and noise will be generated, which will endanger the quality of the project and human health. The advantages of metal hoses just make up for this. It has good vibration isolation and noise reduction functions. Engineering quality and service life. Therefore, metal hoses are installed on the inlet and outlet of the pump. Due to its many functions, it is more and more widely used in engineering. However, the correct selection and use play a very important role in the life of the hose and the improvement of working conditions. The nominal pressure of metal hoses refers to normal temperature conditions. The general hydraulic test and the failure test are carried out under normal temperature conditions. The minimum bend radius Rs of the metal hose is a particularly critical parameter that is important to see in engineering and directly affects the service life of the hose. The working conditions in the actual working environment are various and the conditions of use are very complicated. Therefore, it is very difficult to give a versatility and accurate design of the bending radius by theoretical calculation. After the minimum bend radius of the metal hose is determined, the metal hose length should be correctly selected. If the hose is too long, it will cause instability, increase flow resistance, and additional mechanical operation vibration. If it is too short, it may not achieve the purpose of compensation, vibration and noise reduction, etc., and it will cause excessive bending stress and affect life. There are many factors to consider when determining the length of a metal hose. The first is the bending radius and the actual working environment. Soft connections are also divided into many types, such as threading, pipe, air conditioning, etc., the types of soft connections produced by our factory are mainly used in pipelines and air conditioners.